Introducing a step-by-step guide that will help you achieve the perfect audio setup for your home theater system. In this blog, we will explore the process of syncing your Polk Soundbar to the subwoofer. By following these easy-to-understand steps, you’ll be able to enjoy immersive sound quality and a truly cinematic experience. So, let’s dive right in and discover how to sync polk soundbar to subwoofer, unleashing the full potential of your audio setup.
Let’s find out with subwoofersreview!
Two elements in the Polk soundbar are designed to operate simultaneously through a process known as synchronization, sometimes known as synchronize or synchronization. The auditory outcomes you’ve always desired will be yours thanks to your home theater system, which includes a Polk Soundbar and Subwoofer or Speaker.
Therefore, unplug the Polk audio subwoofer before syncing it with the Soundbar. Next, push the Sync button on the rear for roughly 3 seconds. As follows:
How to Sync Polk Soundbar to Subwoofer
Ensure that the soundbar and the subwoofer are both disconnected before you start. Before establishing a connection for the soundbar, we advise setting up the surround speakers with the subwoofer.
Press and hold the SYNC button for three seconds on the sound bar’s rear. On the subwoofer’s rear, for three seconds, press and hold the SYNC button. Once the sound bar and subwoofer are connected, a faster-blinking green LED on the rear of the subwoofer will begin to show that they are working together. Once you hear a tone, the LED turns completely green.
On each surround speaker, for three seconds, press and hold the SYNC button. Indicating that the soundbar and speaker are linked, the green LED on the rear of the surround speaker will begin to flash more quickly. When connected, the LED is solid green. A tone will be audible as soon as both surround speakers are connected. Some models could let you skip this step.
How to Re-establish Connection
Let’s assume that after taking the aforementioned procedures, you were successful in connecting or pairing a Polk subwoofer with a soundbar. But eventually, the connection abruptly breaks. In such situations, take the actions listed below to re-establish the connection.
If your soundbar is powered on, switch it off. The BAR SYNC button is located on the subwoofer’s back. For only three seconds, press and hold. Pressing and holding the Vol+ and Bluetooth buttons at the same time for 5 seconds is considered simultaneous. Both LEDs will be continuously blinking during this time. The LED will cease blinking once the soundbar and subwoofer connections have been made again.
Causes of Soundbar Polk and Subwoofer Not in Sync
Ineffective connection of both
The connection you are establishing between the soundbar and the subwoofer is another issue. Assuming that only these two devices have Bluetooth enabled, make sure that no other devices have Bluetooth enabled. due to the soundbar’s ability to change the input. Additionally, maintain a suitable distance between each sound system. As a result, the woofer receiver will receive the sounds in their entirety.
On the other hand, if you are using an optical cable to link the Polk subwoofer and Polk soundbar, ensure sure the HDMI cable is properly connected and attached to the slots.
Incorrectly tighten an AC outlet or power wire
Any soundbar and subwoofer that are linked together must prioritize having perfect power. So, if the power supply isn’t functioning properly. possibly not firmly fastened. The device will then not receive enough power to function properly after that point. To ensure proper operation, turn on the Soundbar.
If your subwoofer is not working, the red LED indicator may be the cause. The fuse could be having a difficulty. Subwoofers should be unplugged or turned off, then turned back on after a brief pause of 30 seconds. Check to see whether it is functioning properly now.
Surround speakers linked to Soundbar
The subwoofer will not synchronize if surround speakers are connected to the Soundbar. The Polk Subwoofer and the Subwoofer will no longer be connected if a third device activates Bluetooth. So have their BT turned off and connect them optically.
How to Connect Polk Soundbar to TV?
Your TV’s HDMI ARC compatibility should be verified first. Some older and less expensive versions of TV don’t, despite the fact that many contemporary TVs do. You’ll also require an HDMI cable if that’s a choice. Although they may all have the proper ports, many soundbars don’t come with cables.
Simply attach the HDMI cable to the soundbar’s HDMI IN port to complete the task. Following that, attach the cord’s opposite end to the HDMI ARC or eARC OUT port on the TV. At this point, the majority of TVs will finish the setup automatically; however, you might need to access your TV’s audio settings in order to allow the HDMI connection.
With Optical Cable
The second-best connection option is a digital optical link; the best option is HDMI exclusively. The sound will still be in HD and there won’t be any lag. Observe these steps to connect via fiber:
- Your soundbar’s IN port and the TV’s OUT port should both be connected to your digital optical cable.
- To choose Optical Digital as the source or input, use the remote control for the soundbar.
- Choose Digital Optical OUT as the audio channel in the advanced audio settings of the TV.
Via Bluetooth
Polk Soundbars have Bluetooth built in, although some of the more cost-effective models are notorious for erratic connections and lag (delay with video). It would be better if there was an alternative. But here’s what you should do if you have a nicer Polk model or have no other options:
- To activate Bluetooth connection mode, press the button on the soundbar itself or the remote control. You should press the button down for a minute if it is on the soundbar; otherwise, refer to the directions for your particular model.
- Look for Bluetooth in the network settings of your TV. Look for a new gadget and connect it to your soundbar.
- Verify that the sound is set to OUT through the Bluetooth connection in the TV’s sound settings.
Bluetooth is made to be used with mobile devices quickly. The TV will function, but your latency and connection problems will likely be worse. Keep the soundbar close to the TV and disable any other Bluetooth connections in the vicinity to reduce those issues.
You may also like: How To Connect Samsung Soundbar To Subwoofer Without Remote
Conclusion
In conclusion, syncing your Polk Soundbar to the subwoofer is a simple process that can greatly enhance your audio experience. By following the step-by-step guide outlined above, you can ensure that both devices are properly connected and working together seamlessly. Remember to check for any firmware updates and adjust the settings according to your preferences. With a synced soundbar and subwoofer, you can enjoy immersive and high-quality sound for all your entertainment needs.