Do you know How To Break In A Subwoofer? You will hear that you need to “break in” your sub, whether you purchased it for a sound system or the audio in your car. Do you actually need to, though? And if so, how should a subwoofer be broken in?
Use a 4-step technique to know How To Break In A Subwoofer. The stiff components of your subwoofer become more flexible as it breaks in. A brief break-in period at a reasonable volume is the first stage. Then, play a longer break-in at maximum volume. A final break of more than 10 to 12 hours is step three.
It’s not difficult to break in a subwoofer, but if you only listen to people who say you don’t need to, you’ll never know that. In this piece, subwoofersreview.com will show you how and why you ought to.
How Should a Subwoofer Be Broken In?
In this section, we’ll first go through How To Break In A Subwoofer for a sound system. After that, we’ll talk about several methods for breaking into automotive subwoofers.
Don’t plug the subwoofer in or turn it up all the way once you get it home. Even if you don’t harm the sub, you won’t obtain its full performance if you do this. Instead, adhere to the subsequent four steps:
Examine the Connections
It’s simple to connect your new subwoofers incorrectly in the thrill of receiving your new equipment. For instance, 16-gauge speaker wires are appropriate. Additionally, speakers must be wired in phase. You also do not want to short out your amplifier. Your subwoofers won’t have any use after this.
Loop a recording
A composition with consistent and repeating deep bass is what you want when you’re looking for something to break in your subwoofer. You need a piece with a deeper, more consistent beat, even if you enjoy the percussion-heavy introduction of Beethoven’s fifth. A reggae song is a fantastic choice. Make sure the bass is just loud enough for the driver to move.
Some individuals might advise using “pink noise.” You need music that will make the driver work, though, as the driver moves energy to produce bass.
Play at a Medium Volume
Play the song you’ve chosen at a medium volume for fifteen to twenty minutes. By doing so, the driver can get used to the amp and start the warm-up phase. This provides components for the resins in suspension to start the loosening process.
Completely Break In
It’s time to amplify a little. Play it for around two hours at a volume that is double the normal level. The subs will be louder when you return if you leave during that period. This is due to the mechanical parts—which we’ll talk about later—becoming more flexible.
The Break-In That Will End All Breaks. The process will be finished by playing for a final 10–12 hours at a moderate difficulty. You could obtain an additional 1 to 2 dB of gain from this extended working time.
How To Break In A Subwoofer in a Car?
A few things are necessary before you begin. First, your speakers’ power load needs to be sufficient for your subwoofers.
Second, listen to music with lots of low-frequency bass.
There are two ways to break in a subwoofer: The simple approach and the difficult way. Let’s begin with the simple route first. Its ease of use makes it a widely utilized technique.
In your car, mount the subwoofers.
Play your favorite songs for a week or two (or roughly 12 hours). Maintain a moderate volume level.
The suspension system in your sub will get more flexible as you do this. Your subwoofer will sound louder at the same volume, you’ll notice. The lower Fs are responsible for that.
Set your gains in a couple of weeks, then launch yourself forward.
Your sub will be broken in using the simple method of How To Break In A Subwoofer, so all you need to do is be patient.
What Happens if a Subwoofer Isn’t Broken In?
Maximizing your subwoofer as soon as it’s installed will reduce its lifespan and cause undesirable distortion. People that don’t break in their subwoofers frequently experience the following issues:
- Defective Suspension. Forcing your subs too soon puts more strain on the system as a whole. A damaged suspension increases the likelihood that the suspension will separate from the basket.
- Burnt Coil. If the cone excursion is improper, the coil will heat very quickly. The coil’s limited excursion prevents it from having enough space to allow heat to escape. The likelihood that the voice wires may be burned increases as heat builds up more quickly.
To sum up
Although some contend that subwoofers don’t require breaking in, the majority of specialists will advise against it. A subwoofer can develop its maximum thrust during breaking in, which reduces the power requirement for your subwoofers and increases their range. This gives you more volume with less power.
You run the risk of damaging crucial woofer parts, like the spider, cone, and surround, if you don’t break them in. Burning the coil is another danger you assume.
Why wouldn’t you, seeing as how breaking in a subwoofer is so easy? Even if you believe it is unnecessary, think about breaking it in as a safety measure. You just waited a little longer to rattle some windows if it wasn’t necessary. However, you will have to wait for new subs if your current subs are damaged because you were impatient.