Are you tired of the annoying popping sound coming from your subwoofer? It can be quite frustrating, especially when you’re trying to enjoy your favorite music or watch a movie. So, why is my subwoofer popping? In this blog post, subwoofersreview will delve into the common reasons behind subwoofer popping and explore some possible solutions. So, if you’re ready to say goodbye to those pesky pops, keep reading!
Why is My Subwoofer Popping while Music is Playing?
When you actually use the subwoofer, subwoofer noise also happens. Your favorite songs’ pop music is a noisy thing that makes you want to turn the sound off.
Full volume of the subwoofer is turned on
High bass boost or gain can cause excessive subwoofer output at high volumes.
Excessively low subsonic filter
While your subwoofer may not be able to accurately reproduce some frequencies, your amplifier can. The pop might go away if you try playing the subwoofer while gradually changing the subsonic or (low-pass) filter.
Enhancer of bass
Bass boost, or “sound distortion boost” as we like to call it, is a rather frequent setting on your amplifier. We believe that to be the worst. It is frequently misused and not always advised. When looking for subwoofer noise, this should be turned off.
Ground or power Not done correctly
The amount of power that can be delivered to the amplifier by it will be limited by a short or ground fault between the power and ground wires. The performance of the subwoofer declines as power decreases since it can produce less power. When the volume is turned up or the subwoofer is amplified, you will notice this at high volume because the subwoofer will activate and produce static.
Broken or damaged signal wire
Speaker cables and RCA cables may also be to blame! The majority of the time, this is not the case, but it is nevertheless important to note that inexpensive or pinched signal wires to the amplifier or from the amplifier to the subwoofer have been known to produce a hiss that resembles a pop.
Why is My Subwoofer Popping when Turned Off?
Issue with installation of auto-on
Your subwoofer DSP may frequently shut down abruptly before your amplifier if the auto-on setting is used. As a result, when the subwoofer is turned on, it makes a crushing noise. Your speakers will work properly if you maintain turning off the subwoofer in the future.
Interference from wireless subwoofers
Another cause of speaker noise issues is interference from wireless subwoofers. Problems with the physical structure of the subwoofer, loose input connections, unsuitable amplifiers, signal interruptions, and defective power supply can all lead to popping and cracking in the subwoofer. Many of these issues are fixable by you, however you might need to replace some parts.
Difficulty with the structure
If the actual design of your subwoofer is flawed, it will pop while playing loudly. Another reason a subwoofer may appear is due to loose input connections or an unsuitable amplifier.
Poor subwoofer
The subwoofer won’t have enough power to operate if the power supply is broken, which will result in a signal cut-off. Inadequate power supplies frequently cause subwoofers to emit unpleasant buzzing. The subwoofer wires and leads may also be at fault for the subwoofer’s poor performance. The noise is also caused by using a subwoofer amplifier that is weak.
Why does this Problem Only Happen on Cars?
A wiring issue is almost often the cause of popping sounds coming from your subwoofer at home. Lower frequency vibrations have the ability to shake connections, interrupting a circuit. You can hear the wires slipping in and out of the subwoofer terminals as your home entertainment system crackles. When using a Bluetooth subwoofer, local interference is frequently the cause of the sound output.
To enhance sound output, you might need to unplug some of the other equipment in the space. An amplifier and subwoofer are included in a home theater subsystem, which is assembled by the manufacturer. The source matching issues you can have with a car audio system are usually avoided by buying them in sets.
What Subwoofer should I Use to Prevent Popping?
You will spend all of your time searching for a subwoofer that ensures no popping, distortion, or feedback. It is nonexistent. The system itself is broken, which is the root of the pop-up issue. The results won’t be good if the connection, cable, or power source are not properly configured.
Cheaper subwoofers are more prone to generate distortion and feedback, but the power supply or connection is what causes the pop-out. As a result, the configuration itself is more crucial than the price. If the sub’s receiver is where the sound is coming from, a defective electrolytic capacitor may be the cause.
You will need to connect these directly with the amplifier volume cranked all the way down because they are present throughout the audio chain. As you gradually raise the volume, start playing the original material. There is an issue with the sub-amplifier if you continue to hear pops. If not, your automobile or home’s circuit or the receiver may be the cause of the issue.
Even though dealing with a subwoofer that makes a bang can be a little frustrating, fixing it is typically simple and only needs a few minutes to finish. When you encounter this issue again, keep this guide close at hand so you can identify it quickly.
You may also like: Why Is My Subwoofer Not Working? 3 Reasons To Explain And Ways To Fix
Conclusion
In conclusion, if you are experiencing popping sounds from your subwoofer, there are several potential causes to consider. It could be due to incorrect wiring, a faulty amplifier, or even issues with the audio source. It is important to troubleshoot the problem systematically, checking each component and connection to ensure everything is properly set up.
Additionally, adjusting the subwoofer settings and considering the placement of the subwoofer can also help minimize popping sounds. By addressing these potential causes, you can enjoy a smooth and uninterrupted audio experience with your subwoofer.